1920x1080 FHD Guide Display Board for Information Point, WF-G3602, AndroidSBC, Reykjavik

TL;DR: 1920x1080 FHD Guide Display Board for Information Point

AndroidSBC sourcing desk: smart guide kiosk board pricing held flat through the current quarter serving Reykjavik, Iceland. The WF-G3602 smart guide kiosk Android motherboard spans the wayfinding information kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus eDP, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Reykjavik and Iceland importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

The WF-G smart guide kiosk Android motherboard family spans venue types rather than a single product category. AndroidSBC supplies the same twelve-model family into shopping centre floor directories, tenant and product finders, supermarket price check points, pharmacy enquiry counters, airport and transit wayfinding banks, hospital and clinic orientation points, hotel and resort lobby guides, museum and exhibition interpretive displays, campus and university directories, government building service points, casino and stadium concourse guides and outdoor smart city information pillars. Reykjavik integrators typically start with one venue type, prove the content stack, then reuse the board on the next site. Iceland distributors buy the family as a catalogue and configure per client instead of re-qualifying a new board for every tender. OEM private label starts at 100 pieces, ODM carrier board work at 500 pieces, and both tracks keep the same seven-year firmware window that applies to the standard Reykjavik and Iceland catalogue SKUs.

WF-G3602 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3602 (wayfinding information kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Iceland importers sourcing the WF-G family, the WF-G3602-A variant is the typical configuration for the public venue wayfinding and route planning use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Iceland Buyers

The fourth obstacle is unattended reliability. A directory screen that runs from mall open to mall close, seven days a week, exposes thermal, power and storage weaknesses that a bench test in Reykjavik will never show.

Working with the source factory removes the middle layer. Iceland integrators reach the AndroidSBC engineering desk directly, Reykjavik specification changes go into the next layout revision instead of into a negotiation, and failure analysis for any WF-G lot is completed by the CE/EEA conformity with PTA radio interface notification line that produced it, with PTA Iceland conformity files on record for Port of Hamburg. On the Hamburg - Shenzhen lane, 39700 boards are committed for Reykjavik and Iceland as of September 18, 2026; AndroidSBC counts this as the 4th release window on the family.

Competitive Comparison: WF-G3602 vs Competing Smart Guide Kiosk Android Boards

When Reykjavik system integrators put the WF-G family next to a single-platform competitor, four differences show up repeatedly in Iceland evaluations, and they are the differences that determine total cost across a multi-year venue estate.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Touch behaviour is the quiet driver. Visitors expect a directory to respond like a phone: multi-touch, portrait or landscape, anti-glare under retail lighting, and a route drawn on screen in under a second. As those expectations spread across Iceland venues, the wayfinding information kiosk board has to carry a calibrated capacitive or IR controller alongside the display and the content client. Analysts tracking Reykjavik deployments point out that boards with a bundled touch driver package shorten the acceptance path, which is often the longest single item in a kiosk handover.

• Mall floor directories and tenant finders: WF-G3602 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3566 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3566 and the industrial WF-G3288 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3288 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

None of this changes the specification logic: Iceland venues still buy on touch response, thermal fit and update control, and the market data only sets the volume expectation for Reykjavik.

Partner Success Story: Hanul Venue Services (mall and exhibition service provider)

A recent Hanul Venue Services deployment in the Korea commercial venues segment shows how the WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Reykjavik integrators. Hanul Venue Services installed 39700 WF-G directory and exhibition guide boards across a commercial venue network.

• OEM relationship: AndroidSBC private-label SKU shipped with Hanul Venue Services branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus PTA Iceland conformity, all bundled into the Shenzhen source-factory shipment.

Hanul Venue Services Digital Operations Head for Korea Commercial Venues highlighted: Hanul Venue Services rolled 39700 units into its Iceland venue estate because the directory and wayfinding interface on the WF-G board let each Reykjavik site connect floor plans to tenant data without custom firmware work.

Field Report: wayfinding kiosk bank installation at a transit interchange

LONGGANG, Shenzhen, September 18, 2026 - Jin Tao, AndroidSBC field desk. A mains-cut test was run mid-burn-in: power was removed for 30 seconds and the WF-G3602 boards returned to the wayfinding information kiosk directory home screen without operator input. The WF-G3602 smart guide kiosk Android motherboard order for Reykjavik, Iceland cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.

The WF-G3602 wayfinding information kiosk production lot includes the WF-G3602-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Iceland integrators, the PTA Iceland conformity plus CE/EEA conformity with PTA radio interface notification paperwork is bundled.

Filed by Jin Tao, AndroidSBC field desk, LONGGANG, Shenzhen. Iceland integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3602 Application Scenarios

The WF-G3602 wayfinding information kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3602-A configuration is the typical build for the public venue wayfinding and route planning use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3602 plus WF-G3399 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G1330 plus WF-G3602 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G1331 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G6180 plus WF-G3399 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G1330 plus WF-G6180 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3399 plus WF-G1331 carry the guest orientation flow in Reykjavik.
• Exhibition and museum interpretive display points: WF-G3602 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G6180 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Reykjavik: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Reykjavik Buyers

AndroidSBC runs three entry tracks for Reykjavik and Iceland partners, and the WF-G family is available on all three from the same source factory.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

The three tracks exist because Reykjavik and Iceland buyers enter at different stages: some start with a sample board, some with a tender, and some with a private-label programme already sold.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a wayfinding information kiosk?

Answer: Yes. AndroidSBC ships the WF-G family with wayfinding information kiosk as a standard configuration; the Rockchip and Allwinner tiers share one firmware baseline, one driver package and one update channel.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: The differences are measurable. RK3588 is 8nm with eight cores, Mali-G610 MP4 and 6 TOPS; RK3568 is 22nm, quad-core A55 2.0GHz, Mali-G52 2EE, 1 TOPS and triple independent output; RK3566 is the same core at 1.8GHz with 0.8 TOPS; RK3288 is a 28nm 32-bit A17 part with the Mali-T764; RK3399 is a 28nm big.LITTLE A72 plus A53 part with the Mali-T860 MP4; T527 is a 22nm octa-core A55 industrial part with 2 TOPS; A133 and H618 are quad-core A53 entry parts. AndroidSBC specifies RK3568 against the workload for Reykjavik.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Iceland?

Answer: Yes. For Iceland buyers the standard bundle is CE / FCC / RoHS plus PTA Iceland conformity and CE/EEA conformity with PTA radio interface notification, routed through Port of Hamburg. AndroidSBC also keeps the EMC, ESD and surge immunity test reports on file for venue property handover in Reykjavik.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: There is no minimum order to evaluate the WF-G family: a single board ships in 1-3 days. Scaling up, Reykjavik partners move to the OEM track at 100 pieces or the ODM track at 500 pieces, with a 15-30 day production window.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. The ODM track covers AOSP and Linux BSP porting, custom boot animation, custom launcher, pre-installed content clients and driver work. Reykjavik integrators get a versioned build they can pin rather than a vendor image that changes without notice.

How are software updates and long-term support handled on the WF-G family?

Answer: AndroidSBC handles updates as a supply commitment: a seven-year firmware window, a versioned SDK, staged OTA with rollback, and a documented migration path when a silicon tier reaches end of life. For Reykjavik estates that removes the usual two-year requalification cycle.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. Shipments can be consolidated into a 3PL or FBA destination for Reykjavik partners, with carton labelling, palletisation and the PTA Iceland plus CE/EEA conformity with PTA radio interface notification paperwork prepared in Shenzhen before the lot leaves.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: AndroidSBC runs RMA from the factory, not from a distributor. DOA is replaced on evidence from buffer stock, field failures are analysed by the line that built the board, and the report goes back to the Iceland integrator with the root cause.

Contact AndroidSBC: Start Your WF-G3602 Sourcing Conversation

For the WF-G smart guide kiosk Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Reykjavik integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Reykjavik and Iceland buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-G family.